CNC PRESS BRAKES
CNC Press Brake
Brochure
UrunlerTeknikTablo
General features
• The machine frame manufactured with the advanced technology with exact tolerances and stress relieved with significant welded components.
All tensile points designed with large radii and strain accumulation and possible welding cracks eliminated.
• The lower and upper tables’ inertias designed for optimum value for minimum deformation.
• The top plate intended to positioned vertically so that the roller bearings, piston bearings, and felts can compensate for vertical loads.
• The hydraulic cylinder is designed as double-sided and honed to surface quality of 2 microns. Thus, minimum wear resistance is created for the felts. The cylinder bodies manufactured as SAE 1040 material forged.
• The hydraulic cylinders are bolted to the front of the feet with bolts and cams to provide excellent leveling and load balancing.
• Piston head features: Omega-type felts fitted with full bronze bearings, semi-angled sleeves.
• The pistons are precision ground and hard chrome plated to provide low friction and abrasion resistance when the piston passes through the felts.

• The adjustable top tray slides made from materials that are suitable for little friction resistance. These beds arranged for guiding to move the top table from right to left and front to rear.
• The Hilalsan hydraulic system allows precise usage at all pressure values up to the maximum operating pressure. At the same time, with these pressure values, precise cylinder positioning, synchronization, and repeatability are achieved.
• Backgauge system manufactured following environmental conditions. Backgauge bearings made for heavy conditions with double bearers. Scrapping type bearings used against dust and other particles that will accumulate in the linear guideways against dusty environmental conditions.
• The outer surface of the machine is painted with two layers of paint at least 60 microns in thickness to protect against weather conditions. Paint drying is done gradually in a different time and temperature ranges in state-of-the-art ovens.
• Standard Y1, Y2, X-axis.


Features
• Y1,Y2,X 3 Axes CNC
• Cybelec Touch8 Touch Screen Colour Control Unit
• Hilalsan X Axis Back Gauge with AC Motor,
Including 2 pcs Finger Blocks
• Support arm with scale & T-Slot & Tilting stop. 2 pcs
• Hilalsan European Type Top Tool Clamping
• European Type Top Tool H:66,6mm 85° R:08mm
• Hilalsan Multi 5V Bottom Tool H:70x70mm 85°
• Front Laser Safety Manual Fiessler Akas FPBS
• Back safety Light Curtains
• Lighting Lamp
• Foot Pedal with Emergency Stop Button

• Manual Crowning
• Motorized Crowning
• Hilalsan X,R Axes Back Gauge with AC Motor
• Hilalsan Heavy Duty X,R,Z1,Z2 Axes Back Gauge with
Mitsubishi Servo Motor
• Hilalsan Heavy Duty X,R,Z1,Z2,X5,X6 Axes Back Gauge with
Mitsubishi Servo Motor
• Hilalsan ATF Type X1,X2,R1,R2,Z1,Z2 Axes Back Gauge with
Mitsubishi Servo Motor
• Sliding Rear Door
• Custom Full-length casing
• Stand Type Foot Pedal with Emergency Stop Button ( Fiessler )
• Sheet Follower . Mitsubishi Servo Motor
• Oil Heather
• Oil Coolant with Fan
• Rolleri European Type Hydraulic Top Tool Clamping ,
• Rolleri European Type Hydraulic Bottom Tool Clamping ,
• Wila Type Hydraulic Top Tool Clamping ,
• Wila Type Hydraulic Bottom Tool Clamping ,
• Central Lubrication (Manual)
• Central lubrication (Motorized)
• CE with Manual Fiessler AKAS II M-FMSC ( Safety Plc )

Photos